Conveyor belt systems since 1977
Conveyor belt systems and contactless dust control
Products, installation and technical support for every point of the conveyor line, from loading point to return strand.
- 49years in Türkiye (since 1977)
- 8product groups
- 14products
AirScrape: contactless skirt sealing
- Transfer pointDust, spillage and impact damage occur where material lands on the belt.
- Contactless mountingAirScrape hangs beside the belt without touching it, which prevents belt damage from edge contact.
- Air intake and suctionIts arrangement draws outside air inwards and creates suction, which grows with belt speed.
- Material stays on the beltFine material stays on the belt while coarse material is directed to the centre.
- Adjustable systemThe system adjusts lengthwise and crosswise, so it fits different belt widths and plant requirements.
Conveyor map
The problems encountered in each section of the conveyor line, from loading point to return strand, and the related products.
Skip the map-
Dust, spillage and impact damage occur where material lands on the belt.
-
The belt wears, tears or gets punctured over time; choosing the right belt and repairing it in time shortens downtime.
-
Making a splice quickly and correctly shortens unplanned downtime.
-
If it is not cleaned off, material stuck to the belt is carried onto the return strand, gets into the pulleys and wears the pulley surface.
- 1/2
First cleaning: primary scraper
The belt wraps half a turn round the pulley and the material discharges into the chute. The primary scraper, bearing on the belt at the pulley, removes the large pieces stuck to it.
- 2/2
Second cleaning: secondary scraper
Under the belt as it runs onto the return strand, the secondary scraper takes off the fine particles the primary leaves. The scraped material falls into the chute.
- 1/2
-
Mistracking (the belt running off to one side) damages the belt edges; material that falls onto the inner face of the return belt can get into the tail pulley and idlers.
Which problem do you have on your line?
Choose a problem; the recommended products and request options open just below.
Dust
Dust from the belt edge at transfer points soils the work area and causes material loss. Contactless skirt sealing keeps fine material on the belt.
Recommended products
Material spillage
Material spilling at the loading point builds up around the line. Sealing, belt support and tracking are considered together.
Recommended products
Sticking and carryback
Material stuck to the belt passes the head pulley, travels onto the return strand and gets into the pulleys. Primary and secondary scrapers remove it.
Recommended products
Belt mistracking
A mistracking belt runs off to one side and its edges are damaged. A tracking idler acts as the belt starts to move off centre and guides it back.
Recommended products
Impact damage
Falling material strains the belt at the loading point and makes it sag. An impact bed absorbs the impact; damage is repaired with repair compound.
Recommended products
Splicing and repair
Making a splice quickly and correctly shortens unplanned downtime. Mechanical splices, installation kits and repair materials are considered together.
Recommended products
Belt cleaning at the head pulley
The primary scraper carries out the first cleaning at the head pulley, where the belt discharges, and removes the large pieces stuck to the belt surface.
- Tip rowThe wear parts that touch the belt and scrape the material off.
- Body segmentsThe body parts set side by side that carry the tips.
- Carrier and tensionerThey carry the scraper across the belt width and press the tips onto the belt.
Schematic 3D view; not to scale.
Product groups
8 groups by product type; the conveyor map shows where each product works.
-
-
-
-
-
-
-
-
Services
-
-
-
-
From Switzerland to Türkiye, since 1977
Industries
We supply products and services for conveyor lines in 14 industries.
Bulk materials and heavy industry
Other industries
News
All news-
-
-
Frequently asked questions
For questions specific to your line, you can contact our technical team.
Which product groups do you supply?
Can TailScrape be added to an existing AirScrape system?
What happens during a site survey?
Do you offer installation?
Which industries do you serve?
Quote
Quote request
- RequestYou fill in the form.
- ReviewOur technical team reviews your line details.
- SurveyIf needed, we inspect your line on site.
- QuoteWe send the suitable model and the quote.